Device control an TV set up

After you plug in the wintv usb(you will see a power light come on), if it does not go the setup screen. You can go to Setting,Tv & OneGuide, click on the Device control. Under Devices, you should see "TV tuner settings" click on that, than you will see
"Set up TV Tuner"

Hey petr725,

Let's try following these steps to get the TV power settings up and running:

• Press menu on your Xbox One controller and then select 'Settings'.
• Within the settings screen, select 'TV & OneGuide', followed by 'Device control'.
  
• On the 'Device control' screen, select TV.
• If you haven't set up your projector yet, I suggest trying the remote code '2563' which may work. After setting that up, make sure you select 'Send power off twice' under the 'Advanced' options. That setting is useful for some projectors.
  

Try that out and let us know how it goes!

Hi Atlanta Chrome,

Can you go to TV & OneGuide settings -> Device Control -> Power settings and try changing your TV's control to toggles and/or discretes?

If that doesn't work, go to TV & OneGuide settings -> Device Control -> TV -> Enter a remote code and try entering these in to see if they help?

3810

0363

0668

1037

Thanks Hanzo. What other devices you have?

In TV & OneGuide settings -> Device control -> Power settings, what are things set to there?

In device control -> each device (TV, AVR, STB) -> Enter remote code, what codeset value is listed (something like T2051, C1982, etc).

Sorry the IR delay settings are in Settings / Display & Sound / Volume / Set Up TV & AV Control

Go into your individual devices and the IR settings will be there.

They are in my Cable or Satellite Box settings for example.