D-Link: MAC Filtering

Discus and support D-Link: MAC Filtering in XboX Networking Hardware to solve the problem; D-Link (Routers): MAC Filtering D-Link DIR-868L Login Information Gateway - 192.168.0.1 or Web Server's Default Page Username - Admin Password -... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Aug 29, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    D-Link: MAC Filtering


    D-Link (Routers): MAC Filtering
    D-Link DIR-868L

    Login Information

    MAC Filtering

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser and in the address bar enter 192.168.0.1 and enter admin for the username and leave the password blank when prompted.
    3. Select Advanced from the top menu.
    4. Select Network Filter from the menu on the left.
    5. In the dropdown labeled Configure MAC Filtering below select "Turn MAC Filtering OFF".
    6. Select Save Settings at the top.

    :)
     
    XB1R Hades, Aug 29, 2014
    #1
  2. XB1R Apollo
    XB1R Apollo Guest
    D-Link: MAC Filtering

    D-Link (Routers): MAC Filtering
    Login Information


    MAC Filtering

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser and in the address bar enter 192.168.0.1 and enter admin for the username and leave the password blank when prompted.
    3. Select Advanced from the top menu.
    4. Select Network Filter from the menu on the left.
    5. In the dropdown labeled Configure MAC Filtering below select "Turn MAC Filtering OFF".
    6. Select Save Settings at the top.
     
    XB1R Apollo, Aug 29, 2014
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    D-Link: MAC Filtering

    D-Link (Routers): MAC Filtering
    Login Information


    MAC Filtering

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser and in the address bar enter 192.168.0.1 and enter admin for the username and leave the password blank when prompted.
    3. Select Advanced from the top menu.
    4. Select Network Filter from the menu on the left.
    5. In the dropdown labeled Configure MAC Filtering below select "Turn MAC Filtering OFF".
    6. Select Save Settings at the top.
     
    XB1R Apollo, Aug 29, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

D-Link: MAC Filtering