Controller Elite Series 2 repair issue

There have been many issues with the Original Xbox Elite Controller Series 2. Peeling grips, sticky "A" button, and faulty bumper buttons were among the common issues at launch. Microsoft appears to have fixed the issues with the Series 2.

If your controller is under warranty, then repairs are free. If your controller is out of warranty, then you'll be charged a repair fee.

Check your warranty status here: https://account.microsoft.com/devices/select-device-for-repair

lmgtfy:

https://www.pcgamer.com/how-to-fix-xbox-elite-series-2-bumper/
"The notorious Xbox Elite controller bumpers can and do fail..."

https://www.theverge.com/2020/10/15...-controller-series-2-hardware-issues-warranty

"...The Verge has received reports of the face buttons getting stuck, or the Elite 2 not registering button presses."

here we go

https://answers.microsoft.com/en-us/xbox/forum/all/elite-series-2-bumper-repair/387f68c4-16f7-432a-9518-1c1ae04d3a3f

I tried to fill out repair order, but, as mentioned above, those are the only options i got.

Bumper IS a known issue, as you can see.

Btw., it doenst matter what caused 2 years warranty, it is in place and i'm in the right to use it.

The elite controller series one did have a few faults but did have a good repair back up system but the stronger one is the series 2.

Contact support and they should be able to help you get it set up. You can request a call back or chat with support at http://support.xbox.com/contact-us If you don't see those options, change the category/topic until you do.

I got my Series X in January, and never even took the included controller out of the box, because I own the Elite Series 2. When I dropped my Elite Series 2 (oof) recently, I sent it off for out-of-warranty repair, and pulled out the basic controller, still wrapped and taped in the foam bag in the box.

Stock controller worked fine for a few days, then there was a firmware update - recently, and I'm having intermittent disconnections all the time. It works fine when wired with a USB-A -> USB-C cable (I use the 9-foot one that comes with the Elite Series 2).

I decided, since I'd never had trouble with connectivity on the Elite Series 2, that I would buy a 2nd one, brand new of course. It 100% required me to update before proceeding.

Since I never had issues with the Series X and Elite Series 2, I wasn't aware of the known connectivity issues until the basic controller started intermittently dropping connection.. After searching, I saw that there were a ton of articles from way back in January, including Microsoft acknowledging the problem and releasing a firmware update in March...

Yet here I am with a freshly unwrapped Series X controller AND a brand new, (delivered Sept. 7th) SECOND $180 Elite Series 2 controller, and BOTH are cutting out intermittently..

-Sitting Less than 7 feet from my console

-I keep my batteries charged - both the Elite's internal, and the Enelooph Pro AA rechargeables that I use in the regular controller.

-As I mentioned, latest firmware on controller

-Of course, latest firmware/software on Series X console

-Both controllers work fine when wired.

-Already performed hard power cycle on the controller as well as the console.

-1st Elite (the one being repaired) never had issues until I dropped it - but it was never exposed to that new firmware)

-That's 8 months I used my 1st Elite Series 2 with the Series X and no problems.

It seems to me that the original intermittent connectivity issues were never resolved.