Console xbox start ERROR!

Hi JaredMaqueda,

You might want to check the startup error here and follow the instruction for E102

https://support.xbox.com/en-US/xbox-one/console/startup-error-solution It is likely you will want to do the offline system update.

Hi JaredMaqueda,

You might want to check the startup error here and follow the instruction for E102

https://support.xbox.com/en-US/xbox-one/console/startup-error-solution It is likely you will want to do the offline system update.

If the offline system update does not work and you aren’t able to fix the E102 error, follow these instructions: Contact Microsoft Xbox Tech Support. You will need to have an untampered Xbox [as in the warranty sticker not removed. If you ever opened
your xbox, you no longer have a warranty on it], and also an intact Serial Number located on the bottom of your console. There should be a black sticker on the bottom. On the top of that sticker, there should be something that says S/N. The string of numbers
after that are what you need to give to Xbox Tech Support. Also, make sure this console was not used before you because if someone else registered the console already, you will not be able to fix it. Make sure you let tech support know everything that is going
on, and they will help you as much as they can. If they can't get it fixed over the phone, with the warranty stuff checklist that I generously typed above all clear, then they will request you to send it in to get fixed.

If your console is used or has been tampered with, you will have to purchase another Xbox One.

Are you receiving an error code? Here is the start up troubleshooting
page.

Is the console new?

Hi, this may or may not work but please give it a try.

.

Error C005-3002 occurs when you try to update your Xbox 360 console
Problem

You see the following error code and message when you try to update your Xbox 360 console:

Can’t update your console. Please visit www.xbox.com/support.

Status Code: xxxx-xxxx-xxxx-xxxx-C005-3002

Note The x digits vary.

Your console experienced a problem during the update process.

Solutions

• Solution 1: Retry the update after ejecting the disc tray. Here’s how:
  

1. Eject the disc tray and remove any disc from the console.
   
   Important Do not close the disc tray. Leave it open.
2. With the disc tray open, remove the power cord from the back of the console.
3. Gently push the disc tray about halfway back into the console.
4. Plug the power cord back into the console.
5. Push the power button on the console. The tray should close the rest of the way, and then the console should restart and display the Xbox Dashboard.
   
   Important Do not use the controller button or the disc tray eject button to turn on the console for this step.
   
6. Try updating your console software again.

• Solution 2: Request a repair: If the previous solution didn't resolve the problem, go to the
  Online Service Center and click
  Start Request to request a repair.

Repair or warranty questions? See
Xbox 360 warranty, registration, and repair: Frequently asked questions.

Hi Rafael,

Thanks for reaching out to the forums. We understand you are getting an error when you start your console. We recommend the start
up error solution. Scroll down to the specific error. If you have an original Xbox one and it is out of warranty they no longer offer repairs. As there is no stock for refurbished consoles.

Thanks,

Brad