Console turning off immediately after powered on and Kinect randomly showing disabled

Gravity oXo · Jul 4, 2014

I've been having problems recently with my Xbox One console shutting off immediately after powered on (typically using the "Xbox On" voice command). I've also had problems with my Kinect randomly showing the "disabled" icon towards the top-right of the screen.
If the Kinect shows disabled, holding the power button down to restart the system will usually fix it.

I saw another thread with someone having a similar issue, which suggested to power off the console completely and unplug the power supply, then give it a bit and plug it back in and turn it back on. I tried this as well, but I'm still having problems.

Are there any other solutions, or is this a hardware issue?

Thanks!

:)

The Silent Protagonist · Jul 4, 2014

Turning off immediately after turning on

Well...

It might be a console problem...

if you have done full powercycling the console and tried a different outlet...

If PSU light is solid green and orange then PSU is fine...

The best course of action is to send it in for repair...

You can do so on myservice.xbox.com

BaconShelf · Jul 4, 2014

Turning off immediately after turning on

So, I was playing a game of BF4 when my Xbox crashes. No big deal, it's happened before. However, I go to restart the console, and it powers on, but immediately powers off in less that a second. Tried existing support stuff- nothing.

Original 360, getting a green power light on the brick that turns orange as soon as the console is turned on.

Advice?

GrowlingYapper · Jul 4, 2014

You can try this

Press console button 8 seconds then unplug from mains

Unplug Kinect

Plug console back into mains power on go into setting choose Kinect

Plug Kinect back into console wait for it to be recognized around 10 seconds then recalibrate

Gravity oXo · Jul 5, 2014

That's pretty much what I did before, minus the recalibration. I'll give that a shot.

Gravity oXo · Oct 31, 2018

Well, I was crossing my fingers hoping this would solve it, but my Kinect is still randomly showing disabled... I'm really starting to fear that it is a hardware issue.

GrowlingYapper

You can try this

Press console button 8 seconds then unplug from mains

Unplug Kinect

Plug console back into mains power on go into setting choose Kinect

Plug Kinect back into console wait for it to be recognized around 10 seconds then recalibrate

Gravity oXo

Well, I was crossing my fingers hoping this would solve it, but my Kinect is still randomly showing disabled... I'm really starting to fear that it is a hardware issue.

Gravity oXo

That's pretty much what I did before, minus the recalibration. I'll give that a shot.

ITS FOR LIFE

Mine has been randomly saying it's disabled (showing the icon in the top-right of the screen). A hard-reset (holding the power button down until the system shuts off) temporarily fixes the issue, but it is happening every couple of days or so.

I'll try unplugging the cables while powered off and then reconnect. Hopefully this will resolve my issues as well.

My Kinect has been turning off since I bought the xbox one 3 years ago first kinect I had to unplug whole system 2nd kinect I bought I had to unplug kinect from the back. Would turn on and off and stay off till I unplugged it and was sluggish with my voice
commands. When verizon fios upgraded me from a generation 2 router to a generation 3 router a few weeks ago both kinects work very well and never turn off or miss a voice command. It has something to do with the router.

King Street Run

Mine has been randomly saying it's disabled (showing the icon in the top-right of the screen). A hard-reset (holding the power button down until the system shuts off) temporarily fixes the issue, but it is happening every couple of days or so.

I'll try unplugging the cables while powered off and then reconnect. Hopefully this will resolve my issues as well.

My Kinect has been turning off since I bought the xbox one 3 years ago first kinect I had to unplug whole system 2nd kinect I bought I had to unplug kinect from the back. Would turn on and off and stay off till I unplugged it and was sluggish with my voice
commands. When verizon fios upgraded me from a generation 2 router to a generation 3 router a few weeks ago both kinects work very well and never turn off or miss a voice command. It has something to do with the router.

Console turning off immediately after powered on and Kinect randomly showing disabled