Console doesn't turn on (Red beeping light)

the guess of it being the hard drive or a disk in the drive just doesn't make any sense.

The Console is off , i try to turn it on.

Rather then hearing the beep and seeing the green light as the system turns on.

I hear a strange noise , the green light for a second and system does not turn on. , If i try again , the noise might happen , the light will not , and system still stays off.

This can continue for a few minutes , or until i say screw it and leave it alone for 10 minutes and try again.

With further testing , no cd in the drive , no hard drive in the xbox , and switched to using red/white/yellow cables rather then hdmi , still get the noises.

my Xbox 360 does nothing. It won't even beep. It just shows a light orange light. when i turn it on, or try to, it doesn't turn on or off at all. If you have the support number for usa please let me know. thank you

My name is Loren. I'm an Independent Advisor, and I'll be glad to help you today.

Try this:

- If there's a disc in the Xbox console, eject it.

- On the console, press and hold the Xbox button for five seconds to turn off the console.

- Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second beep occurs.

If that doesn't work, you can perform steps from this link:

https://support.xbox.com/help/hardware-network/...

Hello TokarevSergey! I'm Claus, an Independent Microsoft Community Consultant for Xbox! Glad to be able to help you!

Given what you've reported, and I was able to see that you own an Xbox Series X, let's try a few things. First, follow these steps:

1. Unplug it from the wall for 30 seconds.

2. Connect it to wall again.

3. Turn it on.

4. Check if the issue has been resolved.

If the console doesn't even turn the lights on, it could be that your console will have to be repaired. If it does turns on the white light, it could be that you have a bad video setting. Follow these steps:

1. If there's a disc in the Xbox console, eject it (only applies to Xbox One (S and X) and Series X).

2. On the console, press and hold the Xbox button for 10 seconds to turn off the console.

3. Press and hold the Xbox button and the Eject* button (check the note below if your console doesn't have the Eject button) until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later.

The power light will flash on before the second beep. Don’t let go from Power and Eject* ( or Pair, depending on your console) until the second beep occurs.

*Note: If you have an Xbox One S All-Digital Edition or Xbox Series S, you’ll need to press and hold the Xbox button and the Pair button instead, as your console does not have an Eject button.

4. This will boot your console in low resolution mode (640 × 480). To reset this setting, press the Xbox button to open the guide. Select Profile & system, then Settings.

Hi Jonathan. My name is Kyle and I'm an independent advisor.

Have you tried anything else so far?

Connect the Series X to a different TV or monitor, if possible. If that doesn't work, reset your display settings:

If there's a disc in the console, eject it.

Press and hold the Power button on the front of the console for 10 seconds to turn off the console.

Press and hold the Power button and the Eject button until you hear a beep to turn on the console. You'll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep.

Don’t let go until you hear the second beep or see the console start-up in low resolution mode (the Xbox start-up screen will appear slightly pixelated).

If this doesn't work, your console will need to be serviced. Request a service here: https://account.microsoft.com/devices/select-device-for-repair

Thanks,
Kyle