Cisco Cisco DPC3939: Restoring Factory Defaults

Discus and support Cisco Cisco DPC3939: Restoring Factory Defaults in XboX Networking Hardware to solve the problem; Cisco (Modems/Gateways) Cisco DPC3939: Restoring Factory Defaults Cisco DPC3939 Login Information: Default Gateway – 10.0.0.1 Username – admin... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Aug 13, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Cisco Cisco DPC3939: Restoring Factory Defaults


    Cisco (Modems/Gateways) Cisco DPC3939: Restoring Factory Defaults
    Cisco DPC3939

    Login Information:

    Default Gateway – 10.0.0.1

    Username – admin

    Password – password



    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter 10.0.0.1 in the address bar and press enter.
    3. Enter “admin” for the username and “password” for the password when prompted.
    4. Select Troubleshooting from the menu on the left.
    5. Select Reset/Reboot Gateway from the resulting sub-menu.
    6. Click the RESTORE FACTORY SETTINGS button.
    7. Wait for the device to reset.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.

    :)
     
    XBR Poseidon, Aug 13, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Cisco Cisco DPC3939: Bridging Guide

    Cisco (Modems/Gateways) Cisco DPC3939: Bridging Guide
    Cisco DPC3939

    Login Information:

    Default Gateway – 10.0.0.1

    Username – admin

    Password – password



    Bridging Guide

    *Bridging of this device is handled by the Internet Service Provider*
     
    XBR Poseidon, Aug 13, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Cisco Cisco M20: Restore Factory Defaults

    Cisco (Routers) Cisco M20: Restore Factory Defaults
    Cisco M20

    Login Information

    Gateway – 192.168.1.1

    Username - admin

    Password - admin



    Restoring Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway into the address bar of the internet browser. (Example 192.168.1.1)
    4. The router will then prompt for a user name and password. The default is that user name is “admin” and the password is “admin”.
    5. Select Administration at the top.
    6. Click Factory Defaults in the sub menu.
    7. Click the Restore Factory Defaults button.
    8. Wait for the device to restart.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
     
    XBR Poseidon, Aug 13, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Cisco Cisco DPC3939: Restoring Factory Defaults