Cisco Cisco DCP3208: Overview

Discus and support Cisco Cisco DCP3208: Overview in XboX Networking Hardware to solve the problem; Cisco (Modems/Gateways) Cisco DCP3208: Overview Cisco DPC3208 Login Info Gateway Address: 192.168.0.1 User Name: cusadmin Password: password... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Jul 6, 2015.

  1. XBR Poseidon
    XBR Poseidon Guest

    Cisco Cisco DCP3208: Overview


    Cisco (Modems/Gateways) Cisco DCP3208: Overview
    Cisco DPC3208

    Login Info

    Gateway Address: 192.168.0.1

    User Name: cusadmin

    Password: password







    How to Find SSID (Network Name)

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Wireless from the menu across the top.
    4. Select Basic Settings from the available tabs.
    5. The SSID (Network Name) is found next to Wireless Network Name (SSID).


    How To Find Wireless Passphrase (WPA/WEP)

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Wireless from the menu across the top.
    4. Select Basic Settings from the available tabs.
    5. The Wireless Passphrase is found next to WPA or WPA2-Personal Wireless Passphrase.


    Changing Wireless Security Type/ Disabling Wireless Security

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Wireless from the menu at the top.
    4. Select Wireless Security from the available tabs.
    5. Select None or Disabled from the Wireless Security Mode drop down.
    6. Click the Save Settings button at the bottom of the page.


    MAC Filtering

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Wireless from the menu at the top.
    4. Select MAC Filter from the available tabs.
    5. Select Disable at top of the menu.
    6. Click the Save Settings button at the bottom of the page.


    Change Wireless Channel

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Wireless from the menu across the top.
    4. Select Basic Settings from the available tabs.
    5. Select the Desired Wireless Channel from the Standard Channel drop down. (Channels 1,3,9,11)
    6. Click the Save Settings button at the bottom of the page.


    Change Wireless Mode

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Wireless from the menu across the top.
    4. Select Basic Settings from the available tabs.
    5. Select G Only from the Network Mode drop down.
    6. Click the Save Settings button at the bottom of the page.


    Change Wireless Band (Width)

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Wireless from the menu across the top.
    4. Select Basic Settings from the available tabs.
    5. Select Standard – 20 MHz Channel Wide from the Channel Width drop down.
    6. Click the Save Settings button at the bottom of the page.


    DHCP Reservation

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Setup from the menu across the top.
    4. Select Lan Setup from the available tabs.
    5. Click the Pre-assigned DHCP IP Addresses button.
    6. *There is no documentation past this step*
    7. There will most likely be a space for the consoles MAC Address and the desired IP Address. Enter this information and click the applicable save button.


    UPnP

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Administration from the menu at the top.
    4. Select Management from the available tabs.
    5. Toggle UPnP on or off depending on your need.
    6. Click the Save Settings button.


    DMZ

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Applications & Gaming from the menu at the top.
    4. Select DMZ from the available tabs.
    5. Select Enable from the DMZ Hosting option.
    6. Enter the IP Address of your Xbox console.
    7. Click the Save Settings button.


    Disable DMZ

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Applications & Gaming from the menu at the top.
    4. Select DMZ from the available tabs.
    5. Select Disable from the DMZ Hosting option.
    6. Click the Save Settings button.


    Port Forwarding

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Applications & Gaming from the menu at the top.
    4. Select Port Range Forwarding from the available tabs.
    5. Enter 3074 for both the start and end port in the next available line in the table.
    6. Set the Protocol drop to both.
    7. Enter the IP Address of your Xbox console in the IP Address space.
    8. Check the Enable box.
    9. Click the Save Settings button found at the bottom of the screen.


    Disable Port Forwarding

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Applications & Gaming from the menu at the top.
    4. Select Port Range Forwarding from the available tabs.
    5. Uncheck the Enable box next to any rules containing 3074 as the port number.
    6. Click the Save Settings button found at the bottom of the screen.


    Firewall

    *There do not appear to be firewall options that effect console performance*



    How to Find Firmware Version

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Status from the menu at the top.
    4. Select Gateway from the available tabs.
    5. The firmware version can be found next to Firmware Version.


    Firmware Update

    *Firmware Updates occur automatically when pushed by the ISP.*



    Restore Factory Defaults

    Through Firmware

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Administration from the menu at the top.
    4. Select Factory Defaults from the available tabs.
    5. Click the Restore Factory Defaults button.


    Through Hardware

    1. Locate the reset button on the back or bottom of the device.
    2. Press and hold the reset button for a minimum of 10 seconds then release the button.
    3. Wait for the device to restart.


    Bridging Guide

    *This device does not appear to support bridge mode.*



    Known Issues

    *No Known Issues*



    Multiple Console Support

    We have no confirmed cases where multiple consoles were able to obtain an Open NAT state while using this device. Please comment on this page if you have been able obtain Open NAT on two or more consoles using this device.



    Device Manual

    The device manual can be found
    here    .

    :)
     
    XBR Poseidon, Jul 6, 2015
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Cisco Cisco DCP3208: Firmware

    Cisco (Modems/Gateways) Cisco DCP3208: Firmware
    Cisco DPC3208

    Login Info

    Gateway Address: 192.168.0.1

    User Name: cusadmin

    Password: password





    How to Find Firmware Version

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Status from the menu at the top.
    4. Select Gateway from the available tabs.
    5. The firmware version can be found next to Firmware Version.


    Firmware Update

    *Firmware Updates occur automatically when pushed by the ISP.*
     
    XBR Poseidon, Jul 6, 2015
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Cisco Cisco DCP3208: UPnP

    Cisco (Modems/Gateways) Cisco DCP3208: UPnP
    Cisco DPC3208

    Login Info

    Gateway Address: 192.168.0.1

    User Name: cusadmin

    Password: password





    UPnP

    1. Open a Web browser and in the address bar type 192.168.0.1, press enter.
    2. Enter “cusadmin” for the username and “password” for the password.
    3. Select Administration from the menu at the top.
    4. Select Management from the available tabs.
    5. Toggle UPnP on or off depending on your need.
    6. Click the Save Settings button.
     
    XBR Poseidon, Jul 6, 2015
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Cisco Cisco DCP3208: Overview