Cisco Cisco DCP3208: Bridging Guide

Cisco (Modems/Gateways) Cisco DCP3208: Bridging Guide
Cisco DPC3208

Login Info

Gateway Address: 192.168.0.1

User Name: cusadmin

Password: password





Bridging Guide

*This device does not appear to support bridge mode.*

:)

 

Cisco Cisco DPC3939: Bridging Guide

Cisco (Modems/Gateways) Cisco DPC3939: Bridging Guide
Cisco DPC3939

Login Information:

Default Gateway – 10.0.0.1

Username – admin

Password – password



Bridging Guide

*Bridging of this device is handled by the Internet Service Provider*

 

Cisco: Bridging Guide

Cisco (Modems/Gateways): Bridging Guide
Login Information

• Gateway - 192.168.1.254
• Username - admin or user
• Password - admin or user or 1PTV-ADM1N

Bridging Guide

*Bridge mode should only be used if you have a router to plug into the device.*

*Please have PPPoE information available if needed to enter into the router (contact ISP if needed to get this information)*

1. Open a web browser.
2. Enter 192.168.1.254 in the address bar.
3. If it asks for a username and password put in (admin/admin, user/user) if you have CenturyLink use (admin/1PTV-ADM1N).
   
4. Select Home Network at the top of the page.
5. Select WAN Setup on the sub-menu.
6. Click the edit button at the top of the list.
7. Select “Bridging” from the “Broadband Connect Type” drop down menu.
8. Select Save.
9. If needed enter the PPPoE information into the router.