Cisco 8642HD: Xbox1 S adding unnecessary "enter" after entering channel #

Cisco (Set-top Boxes) 8642HD: Xbox1 S adding unnecessary "enter" after entering channel #
This worked fine for years with an XB1, after upgrading to an XB1 S I can't change channels without it bringing up a channel details screen that does not go away without pressing another key on the remote. I believe it's doing this by adding an "enter" key
after inputting the numbers.

For example, I say "watch ESPN" and the xbox sends "1 0 1 2 enter" My cable box changes channels without the enter being sent. All it does is bring up the channel details screen (blocks half the screen, I have to grab a remote and hit cancel to make it
go away)

How do I fix/remove this? The xbox automatically detects the cable box during setup (cisco explorer 8642HDC, code=C1877), I've spent hours searching for alternate remote codes but i'm unable to find anything.

:)

 

Cisco 4742HDC not compatible

Ah, I see. Yes, we send a "channel enter" command after the channel digits.

Can you guys let me know what codeset we're using for your Cisco boxes?

 

Cisco Cisco DPC3939: Change Wireless Channel

Cisco (Modems/Gateways) Cisco DPC3939: Change Wireless Channel
Cisco DPC3939

Login Information:

Default Gateway – 10.0.0.1

Username – admin

Password – password



Change Wireless Channel

1. Open a web browser.
2. Enter 10.0.0.1 in the address bar and press enter.
3. Enter “admin” for the username and “password” for the password when prompted.
   
4. Select Connection from the menu on the left.
5. Select Wi-Fi from the resulting sub-menu.
6. Click the Edit button to the right of the network you wish to make changes to.
   
7. Set Channel Selection to manual.
8. Select your desired channel from the Channel drop down. (Channels 1,3,9,11)
9. Click the SAVE SETTINGS button at the bottom of the screen.