Channel Master DVR+ (CM7500)

MarkScheidell · Apr 14, 2015

I have the above 'cable box' for OTA. Xbox One supports it but I'm not certain to what extent. It appears that some 'voice' commands are not understood.

The DVR+ remote has a button labeled "DVR". It takes you to a list of all your record programs available for play back. I don't see how to access this without using the DVR+ remote.

Changing channels, play, pause, skip forward etc. work as voice commands, but after several attempts I can not get Xbox to bring up the DVR menu.

Is there a list some where of Xbox One supported commands\functions for the model?

Thanks.

:)

jessekenyon · Apr 14, 2015

Sling TV now live on XB1

No thanks. I'll keep my Directv. I need a DVR, can't live without it. Not sure if this is live feeds of those channels or on demand. Plus no network channels (FOX, NBC, ABC, CBS) and those are the channels I watch the most. I have too many shows on Network TV that I watch to not have those channels. Directv is expensive but I love it and is my provider of choice.

PeteyPete727 · Apr 14, 2015

xbox 1 not changing the channels on vip 722 receiver

I am able to shut down and turn on my STB, even control the One Guide, controlling channels and controlling DVR Functions worked then stopped, what setting should my IR Delay be, because everything seems to work on my STB, just changing channels and controlling
the DVR functions

SenorTrip · Apr 22, 2015

I have this DVR as well but I can't get itr to work with my X1 at all...can't change channels or anything.

I set my set top box as Channel Master but it does not work and I was previously told that it would only work with the older 7000 model of the DVR.

Can you tell me what you entered for your set top box during the wizard?

MarkScheidell · Oct 31, 2018

"CM7500" ... that's the model number that works the magic ...

MarkScheidell

"CM7500" ... that's the model number that works the magic ...

SenorTrip

I have this DVR as well but I can't get itr to work with my X1 at all...can't change channels or anything.

I set my set top box as Channel Master but it does not work and I was previously told that it would only work with the older 7000 model of the DVR.

Can you tell me what you entered for your set top box during the wizard?

Roddymusprime

I tried it with a channel master 7001 and it did not work properly. Ive used the xbox one with media center extender but that will not work either. It tries to change the channnels on both boxes and ti somewhat works. The Channel master whenever the xbox
xhanges the channels on it it the signal will not stop skipping. So i returned that channel master. The i used the xbox 360 extender but the pronlem with that is that MCE uses 4 numbers to tune to a channel so when i tell xbox one to channel it only does 2
digit channels. I WILL FIND A COMPATIBLE OTA BOX THAT CAN BE FULLY CONTROLED BY XBOX ONE

PeteyPete727

I am able to shut down and turn on my STB, even control the One Guide, controlling channels and controlling DVR Functions worked then stopped, what setting should my IR Delay be, because everything seems to work on my STB, just changing channels and controlling
the DVR functions

JT Kimbell [MSFT]

Hi, so you are unable to change channels? What's the make and model of your DVR?

Channel Master DVR+ (CM7500)