cant connect to teredo ip addres

I dont understand what the hekc is wrong with this exbox and teredo.

I did open all the ports for the verizon fios router to my xbox:

Port 88 (UDP)

Port 3074 (UDP and TCP)

Port 53 (UDP and TCP)

Port 80 (TCP)

Port 500 (UDP)

Port 3544 (UDP)

Port UDP 4500 (UDP)

I also put my xbox in DMZ zone and have static IP set for it.

Yesterday it was working as Moderate NAT thing, today is strict and I cant find teredo, why I was able to find it yesterday and today I cant? Few days ago I had the same issue. SO depending on the day or the mood of xbox one it works or it does not. Whats
wrong? Why this inconsistency?

:)

 

Can't find a Teredo IP addres

Check your modem/router/gateway's IPV6 settings, and enable a setting that allows "Teredo tunneling".

Consult your network hardware documentation on how to access those settings.

 

Can't find a Teredo IP addres

my console is connected to the Internet but I can't connect to any game servers. I have done all of the steps listed to try and resolve this problem but nothing is working.

 

Teredo is related to ipv 6 , please tell me the routerr model. Exact one, you need to either enable Ipv6/teredo tunneling or disable ivp6 to go back to ipv4. It also might not be possible to enable teredo tunneling if your ISP does not support it yet since
ipv6 is just appearing. Basically you need to find ipv6 settings on the Verizon router(Can not help with this, wasn't able to find a databse of layout), in there you should see TEREDO tunneling or IPV6 Tunneling or just Tunneling try enabling that. If that
doesn't work try to disable the ipv6 and test it like that on the xbox one. After its done don't forget to restart the router and the xbox before you test.

 

oh great, thank you for the answer. y router is from Verizon, its MI424WR-GEN3I, firmware 40.21.10.2. I am not sure where to find the tunneling option for the TEREDO, I will keep looking and see if there is option and play with the IP v6 and TEREDO. But
what I find odd is that some days it works where my NAT says its moderate and some days it says its strict. I even put my XBOX in DMZ zone, I also added port forwarding for all the ports that I fund relates to xbox (UDP and TCP) and nothing seems to correct
it. Strange, very strange. Thank you so much for the help. Will keep digging. My XBOX seems like it has static IP assigned as well so its easier to make any port forwarding or assignments for the DMZ, but again, its just odd how it alternates where the NAT
is strict or moderate, and its never open

 

So I did find the ipV6 section in the router config, I did enable it, restarted my router, then I did boot my xbo and still showing up as strict today. I did change my router IP V4 static ip to dynamic, it did not help either, I flipped it back to static,
and no change, shows as strict... I can't find the tunneling option in my router config for the teredo.

 

here is the IP v6 sample screen shots that someone posted on the internet, it shows the configuration for it.

www.dslreports.com/.../27434333

 

I did set forward any UDP traffic to my local IP for xbox, and I got status for NAT open. XBOX has static IP, is in DMZ zone and IP V6 is enabled. But I never seen NAT open before, it was static and moderate (with static being more frequent than moderate),
anyway lets see how long open nat will hold. Thank you for all your suggestions.

 

When xbox live started having alot of issues about 2 weeks ago (around the dates of this thread!) I started having same issue. Did EVERYTHING the guide said. Nothing worked. I was very frustrated. As a last resort I did a factory reset which I hated because
I lost alot of data but it worked immediately. Problem solved. Don't know what it was and am having to redownload everything. But at least I can online and play multiplayer again. More problems with the One in the 6 months I have had it then the years I had
360. Disappointing.

 

Having a heck of a time with my xbox one also, getting all these network problems. Just started a factory reset. Wish me luck!!!!!

 

Hey, guys! I'm sorry to see any connection issues! This thread is over a year old. If you need further assistance, please post up a new thread detailing what you're running into, any error codes you may be receiving, and troubleshooting you've completed.
This way our community can get you the individual support that works best on the forums.