Belkin: Overview

Discus and support Belkin: Overview in XboX Networking Hardware to solve the problem; Belkin (Routers): Overview Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) How to Find SSID (Network Name)... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Aug 1, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Belkin: Overview


    Belkin (Routers): Overview
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)

    How to Find SSID (Network Name)

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Select Network name under WIFI on the right hand side of the screen.
    6. You SSID will be listed next to SSID.
    How to Find Wireless Password (WPA/WEP)

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Select Security under WIFI on the right hand side of the screen.
    6. Your password will be listed under Pre-shared Key or WEP key.
    Changing Wireless Security Type/Disabling

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Select Security under WIFI on the right hand side of the screen.
    6. The security type will be listed as Authentication.
    7. Set to none for no security or choose your preferred encryption type.
    MAC Filtering

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Under firewall near the bottom left select MAC Address Filtering.
    6. Uncheck Enable MAC Address Filtering to disable MAC Filtering.
    7. Select Save.
    Changing the Wireless Channel

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Select Network name under WIFI on the right hand side of the screen.
    6. From the dropdown menu labeled Wireless Channel select the desired channel. (Channels 1,3,9,11)
    7. Select Save.
    Changing Wireless Mode

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Select Network name under WIFI on the right hand side of the screen.
    6. Using the wireless mode dropdown select 802.11g Only.
    7. Select save.
    DHCP Reservation

    **This router does not support DHCP Reservation**

    UPnP

    **If this device does have UPnP it does not have a firmware option to enable or disable.**

    DMZ

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Under firewall near the bottom left select DMZ.
    6. Enable the Virtual DMZ host and enter the xboxs IP address into the Private IP box.
    7. Select Save.
    Disable DMZ

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Under firewall near the bottom left select DMZ.
    6. Uncheck the Enable box.
    7. Select Save.
    Port Forwarding

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Under firewall near the bottom left select Port Forwarding.
    6. Check the box under the first blank row to enable it.
    7. In Description put something so that you know the rule is for the xbox (Xbox1 or Xbox port works fine).
    8. In Inbound port and Private port enter 3074.
    9. For type select both (if both is not there you will need to create two of the same rules, one for TCP and one for UDP).
    10. Enter the IP of the xbox into the Private IP address.
    11. Select Save.
    Disable Port Forwarding

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Under firewall near the bottom left select Port Forwarding.
    6. Uncheck all rows of port forwarding used for the xbox.
    7. Select Save.
    Firewall

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Under firewall near the bottom left select Firewall.
    6. Disable the Firewall.
    7. Select Save.
    How to Find Firmware Version

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Under Utilities near the bottom left select Firmware Update.
    6. Your current firmware will be listed as Firmware Version.
    Firmware Update

    1. Plug the computer into a LAN port via an Ethernet cable. *Wired is recommended*
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Input the password and click Login (by default, the password should be left blank).
    5. From the main menu expand Advanced Settings.
    6. Under Utilities near the bottom left select Firmware Update.
    7. Select Check for New Firmware Version.
    8. Select update if new Firmware is found.
    9. Alternatively you can go to Belkins website and download the latest firmware there.
    10. Should you do that Select Browse and locate the file on your computer.
    11. Select Update.
    Restore Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. Under Utilities near the bottom left select Restore Factory Defaults.
    5. Select Restore Defaults.
    6. From the main menu expand Advanced Settings.
    Through Hardware

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
    Entering PPPoE

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Under WAN Settings select ISP Connection Type.
    6. Select PPPoE as your connection type and click next.
    7. Enter your PPPoE username and password.
    8. Select Save.
    Multiple Console Support

    We have confirmed that this network device is unable to support more than one console with an Open NAT.



    Known Issues

    *There are no known issues with this device at this time.*

    Device Manual

    Click
    Here     for the device manual

    :)
     
    XB1R Hades, Aug 1, 2014
    #1
  2. XBR Dionysus
    XBR Dionysus Guest
    Belkin: Overview

    Belkin (Modems/Gateways): Overview
    Login Information



    • Gateway: 192.168.2.1
    • Username: none
    • Password: none


    How to Find SSID (Network Name)



    1. Connect a computer to the gateway using an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” when prompted for a password.
    5. On the left hand side click on “Channel and SSID”
    6. On the next page, you will see a SSID box; this will have your current SSID (Wireless network name).




    How To Find Wireless Passphrase (WPA/WEP)



    1. Connect a computer to the gateway using an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” when prompted for a password.
    5. On the left hand side click on “Encryption”
    6. Encryption is disabled by default, but if a password has been setup it will be located here.




    Changing Wireless Security Type/ Disabling Wireless Security



    1. Connect a computer to the gateway using an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” when prompted for a password.
    5. On the left hand side click on “Encryption”
    6. Encryption is disabled by default; you can select either a 64bit or 128bit WEP mode.
    7. Once you have selected the desired encryption type, create a password.
    8. Click on the “Apply Changes”




    MAC Filtering



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” when prompted for a password.
    4. On the left hand side, under “Firewall” settings, click on “MAC address filtering”
    5. Check the “Enable MAC Address Filtering” option.
    6. Add a MAC address from a device network into the “MAC Address” box.
    7. Click the “Add” button.
    8. Click on “Apply Changes”


    Disable MAC Filtering



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” when prompted for a password.
    4. On the left hand side under “Firewall” settings, click on “MAC address filtering”
    5. Uncheck the “Enable MAC Address Filtering” option.
    6. Click on “Apply Changes”






    Change Wireless Channel



    1. Connect a computer to the gateway using an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” when prompted for a password.
    5. On the left hand side click on “Channel and SSID”
    6. Select the desired channel.
    7. Click on “Apply Changes”




    Change Wireless Mode



    This feature is not available.





    DHCP Reservation



    This feature is not available.





    UPnP



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” when prompted for a password.
    4. On the left hand side, under “Utilities” settings, click on “UPnP Enabling”
    5. Select the “Enable” option.
    6. Click on “Apply Changes”




    DMZ



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” when prompted for a password.
    4. On the left hand side, under “Firewall” settings, click on “DMZ”
    5. Type in the Xbox’s current IP address in the “Private IP” box.
    6. Check the “Enable” box.
    7. Click on “Apply Changes”


    Disable DMZ



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” when prompted for a password.
    4. On the left hand side, under “Firewall” settings, click on “DMZ”
    5. Delete the “Private IP”
    6. Uncheck the “Enable” box.
    7. Click on “Apply Changes”




    Port Forwarding



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” when prompted for a password.
    4. On the left hand side, under “Firewall” settings, click on “Virtual Servers”
    5. Check the “Enable” box.
    6. In the “Description” box type in “Xbox live”
    7. In the two “Inbound port” type in “3074”
    8. For the “type” change to “both”
    9. Type in the Xbox’s current IP address in the “Private IP” box.
    10. In the “Private port” boxes type in “3074”
    11. Click on “Apply Changes”




    Disable Port Forwarding



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” when prompted for a password.
    4. On the left hand side, under “Firewall” settings, click on “Virtual Servers”
    5. Uncheck the “Enable” box.
    6. Click on “Apply Changes”




    Firewall



    This device has firewall settings but none that apply to the Xbox.







    How to Find Firmware Version



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” when prompted for a password.
    4. Currently you will be logged into the “Status” page.
    5. Under the “Version Info” the current Firmware version will be shown.


    Firmware Update



    Note: You will need to download the firmware from the ISP website or the manufacturer’s webpage.



    1. Connect a computer to the gateway using an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” when prompted for a password.
    5. On the left hand side, under “Utilities” settings, click on “Firmware Update”
    6. You can check for a new firmware version by clicking on “Check Firmware”
    7. Follow in instruction for the firmware update.
    8. If you have downloaded an update, click on the “Browse” button.
    9. Locate the firmware update from your computer.
    10. Select the file.
    11. Click on “Apply Changes”




    Restore Factory Defaults



    From Hardware:

    1. Locate the back of the device, where the Ethernet ports are located.
    2. Hold the reset button on the back for 30 seconds. You will need a paperclip, toothpick or pen to hold down the reset button.
    3. Let go of the reset button and wait about 1 min for the device to reboot.


    From Firmware:

    1. Connect a computer to the gateway using an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” when prompted for a password.
    5. On the left hand side, under “Utilities” settings, click on “Restore Factory Defaults”
    6. Click on the “Restore Defaults” button.
    7. A warning message will appear on screen asking if you want to do this? Click “Ok”
    8. Wait about 1 min for the device to reboot.




    Bridging Guide



    This feature is not available.





    Known Issues



    There are no currently known issues with this device.





    Multiple Console Support



    We have confirmed that this network device is unable to support more than one console with an Open NAT.





    Device Manual



    Click
    here
     
    XBR Dionysus, Aug 1, 2014
    #2
  3. XBR Dionysus
    XBR Dionysus Guest
    Belkin: Overview

    Belkin (Modems/Gateways): Overview
    Login Information



    • Gateway: 192.168.2.1
    • Username: none
    • Password: none


    How to Find SSID (Network Name)



    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” to login, there is no default password.
    5. Click on the “Initial Setup” on the left hand side.
    6. Under “Wireless” click on the “Channel and SSID” option on the left hand side.
    7. The current wireless network name is located next to “SSID”




    How To Find Wireless Passphrase (WPA/WEP)



    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” to login, there is no default password.
    5. Click on the “Initial Setup” on the left hand side.
    6. Under “Wireless” click on the “Encryption” option on the left hand side.
    7. This will give you a list of WEP encryption options.
    8. Currently only WEP is available for this device. Choose a WEP option.
    9. If you select the “Manual” option then you will have to type in a password.
    10. If you select the “Automatic” option then it will create a password for you.
    11. Click the “Enter” button to save changes.




    Changing Wireless Security Type/ Disabling Wireless Security



    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” to login, there is no default password.
    5. Click on the “Initial Setup” on the left hand side.
    6. Under “Wireless” click on the “Encryption” option on the left hand side.
    7. Click the “Disabled” option to turn off the security.
    8. Click the “Enter” button to save changes.




    MAC Filtering



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” to login, there is no default password.
    4. Click on the “Initial Setup” on the left hand side.
    5. Under “Services” click on the “MAC Filtering” option on the left hand side.
    6. Check the “Enabled” box.
    7. Check the “Connection Control” box.
    8. Change the “Allow” dropdown to “Deny”
    9. Skip the “Association Control” option.
    10. Add the MAC address from your network connecting to the Belkin in the “MAC Address” list
    11. Click the “Enter” button to save changes.


    Disable MAC Filtering



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” to login, there is no default password.
    4. Click on the “Initial Setup” on the left hand side.
    5. Under “Services” click on the “MAC Filtering” option on the left hand side.
    6. Uncheck the “Enabled” box.
    7. Click the “Enter” button to save changes.




    Change Wireless Channel



    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” to login, there is no default password.
    5. Click on the “Initial Setup” on the left hand side.
    6. Under “Wireless” click on the “Channel and SSID” option on the left hand side.
    7. Click on the Wireless Channel drop down menu to select a channel.
    8. Click on “Enter” button to save changes.




    Change Wireless Mode



    This feature is not available.





    DHCP Reservation



    This feature is not available.





    UPnP



    This feature is not available.





    DMZ



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” to login, there is no default password.
    4. Click on the “Initial Setup” on the left hand side.
    5. Under “Security” click on the “DMZ” option on the left hand side.
    6. Type in the Xbox’s current IP address in the box provided.
    7. Click on “Enter” button to save changes.


    Disable DMZ



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” to login, there is no default password.
    4. Click on the “Initial Setup” on the left hand side.
    5. Under “Security” click on the “DMZ” option on the left hand side.
    6. Delete the Xbox’s current IP address in the box provided.
    7. Click on “Enter” button to save changes.




    Port Forwarding



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” to login, there is no default password.
    4. Click on the “Initial Setup” on the left hand side.
    5. Under “Security” click on the “Virtual Server” option on the left hand side.
    6. Type in the Xbox’s current IP address into the “Private IP” first and second box.
    7. Type in “3074” in the “Private Port” first and second box.
    8. Select “TCP” for the first box and “UDP” for the second box.
    9. Type in “3074” into the “Public Port” for both the first and second box.
    10. Click on “Enter” button to save changes.




    Disable Port Forwarding



    1. Open a web browser on a computer.
    2. Type the address “192.168.2.1” into the web address bar.
    3. Click on “Submit” to login, there is no default password.
    4. Click on the “Initial Setup” on the left hand side.
    5. Under “Security” click on the “Virtual Server” option on the left hand side.
    6. Remove the Xbox’s current IP address from the “Private IP” first and second box.
    7. Click on “Enter” button to save changes.




    Firewall



    This device has firewall settings but none that apply to the Xbox.







    How to Find Firmware Version



    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” to login, there is no default password.
    5. Click on the “Status” option on the left hand side.


    Firmware Update



    Note: You will need to download the firmware from the ISP website or the manufacturer’s webpage.



    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” to login, there is no default password.
    5. Click on the “Utilities” on the left hand side.
    6. Click on the “Update Firmware” option in the subcategory.
    7. Follow the instructions on this page to finish updating the firmware.




    Restore Factory Defaults



    From Hardware:

    1. Locate the Reset button on the device. Normally found on the back or bottom.
    2. Hold the reset button on the back for 30 seconds. You will need a paperclip, toothpick or pen to hold down the reset button.
    3. Let go of the reset button and wait about 1 min for the device to reboot.


    From Firmware:

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the address “192.168.2.1” into the web address bar.
    4. Click on “Submit” to login, there is no default password.
    5. Click on the “Utilities” on the left hand side.
    6. Click on the “Restore Factory Defaults” option in the subcategory.
    7. Click the “Reset” button.
    8. You will be asked to confirm the reset.
    9. After confirm, wait for about 1 min for the gateway to reset.




    Bridging Guide



    This feature is unavailable.





    Known Issues



    There are no currently known issues with this device.





    Multiple Console Support



    We have confirmed that this network device is unable to support more than one console with an Open NAT.





    Device Manual



    Click
    here
     
    XBR Dionysus, Aug 1, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Belkin: Overview