Belkin: Firmware Update

Discus and support Belkin: Firmware Update in XboX Networking Hardware to solve the problem; Belkin (Routers): Firmware Update Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Firmware Update Plug the... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Aug 1, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Belkin: Firmware Update


    Belkin (Routers): Firmware Update
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)
    Firmware Update

    1. Plug the computer into a LAN port via an Ethernet cable. *Wired is recommended*
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Firmware Update from the menu on the left under the Utilities section.
    7. The firmware version should be listed near the top of this page.
    8. Open another tab in the web browser.
    9. Go to www.belkin.com.
    10. Scroll down and click on Support.
    11. Enter the model number of your device in the search box.
    12. Scroll down to the "Downloads" section under the search results.
    13. Click the link with the model number of your device labeled Firmware Update.
    14. Locate the version of the router you have and click where is says download to download the latest version of the firmware.
    15. Be sure to save the file to a place that is easy to locate such as the desktop or downloads.
    16. Return to the original browser tab that you opened the router's GUI page in.
    17. If the versions do not match you will need to update now.
    18. Click on browse.
    19. Find the firmware bin file from the location that you saved it and click open.
    20. Click Update and let the software install without interruption.

    :)
     
    XB1R Hades, Aug 1, 2014
    #1
  2. XB1R Apollo
    XB1R Apollo Guest
    Belkin: Firmware Update

    Belkin (Routers): Firmware Update
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)

    How to Find Firmware Version

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Click Login in the upper right.
    4. Input the password and click Login (by default, the password should be left blank).
    5. Select Home from the menu at the top.
    6. The Firmware Version will be listed on this page under the Version Info section.
    Firmware Update

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Firmware Update from the menu on the left under the Utilities section.
    7. The firmware version should be listed at the top of this page.
    8. Open another tab in the web browser.
    9. Go to www.belkin.com.
    10. Scroll down and click on Support.
    11. Enter the model number of your device in the search box.
    12. Scroll down to the "Downloads" section under the search results.
    13. Click the link with the model number of your device labeled Firmware Update.
    14. Locate the version of the router you have and click where is says download to download the latest version of the firmware.
    15. Save the file to somewhere that is easy to locate such as the desktop.
    16. Go back to the original tab that you opened the router's GUI page with.
    17. Click on browse.
    18. Find the firmware bin file and click open.
    19. Click Update and let the software install without interruption.
     
    XB1R Apollo, Aug 1, 2014
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    Belkin: Firmware Update

    Belkin (Routers): Firmware Update
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)

    How to Find Firmware Version

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Click Login in the upper right.
    4. Input the password and click Login (by default, the password should be left blank).
    5. Select Home from the menu at the top.
    6. The Firmware Version will be listed on this page under the Version Info section.
    Firmware Update

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Firmware Update from the menu on the left under the Utilities section.
    7. The firmware version should be listed at the top of this page.
    8. Open another tab in the web browser.
    9. Go to www.belkin.com.
    10. Scroll down and click on Support.
    11. Enter the model number of your device in the search box.
    12. Scroll down to the "Downloads" section under the search results.
    13. Click the link with the model number of your device labeled Firmware Update.
    14. Locate the version of the router you have and click where is says download to download the latest version of the firmware.
    15. Save the file to somewhere that is easy to locate such as the desktop.
    16. Go back to the original tab that you opened the router's GUI page with.
    17. Click on browse.
    18. Find the firmware bin file and click open.
    19. Click Update and let the software install without interruption.
     
    XB1R Apollo, Aug 1, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Belkin: Firmware Update