Belkin: Entering PPPoE

Belkin (Routers): Entering PPPoE
Login Information

• Gateway - 192.168.2.1
• Username - N/A (None)
• Password - N/A (None)

Entering PPPoE

1. Open a web browser.
2. In the address bar at the top, type in 192.168.2.1
3. Click Login in the upper right.
4. Input the password and click Login (by default, the password should be left blank).
   
5. Select Connection Type from the menu on the left under the Internet WAN section.
   
6. Select PPPoE and click Next.
7. Enter the PPPoE Username and Password.
   
8. Select Apply Changes at the bottom of the page.

:)

 

Belkin: Entering PPPoE

Belkin (Routers): Entering PPPoE
Login Information

• Gateway - 192.168.2.1
• Username - N/A (None)
• Password - N/A (None)

Entering PPPoE

1. Open a web browser.
2. In the address bar at the top, type in 192.168.2.1
3. Click Login in the upper right.
4. Input the password and click Login (by default, the password should be left blank).
   
5. Select Connection Type from the menu on the left under the Internet WAN section.
   
6. Select PPPoE and click Next.
7. Enter the PPPoE Username and Password.
   
8. Select "Apply Changes" at the bottom of the page.

 

Belkin: Entering PPPoE

Belkin (Routers): Entering PPPoE
Login Information

• Gateway - 192.168.2.1
• Username - N/A (None)
• Password - N/A (None)

Entering PPPoE

1. Open a web browser.
2. In the address bar at the top, type in 192.168.2.1
3. Click Login in the upper right.
4. Input the password and click Login (by default, the password should be left blank).
   
5. Select Connection Type from the menu on the left under the Internet WAN section.
   
6. Select PPPoE and click Next.
7. Enter the PPPoE Username and Password.
   
8. Select Apply Changes at the bottom of the page.