Belkin: DMZ

Belkin (Routers): DMZ
DMZ is not working on this router. i got a replacement and the dmz is still not working.

network on xbox360 is always strict. moderate Nat settings.

any help is appreciated.

:)

 

Belkin: DMZ

Belkin (Routers): DMZ
Login Information

• Gateway - 192.168.2.1
• Username - N/A (None)
• Password - N/A (None)

DMZ

1. Open a web browser.
2. In the address bar at the top, type in 192.168.2.1
3. Click Login in the upper right.
4. Input the password and click Login (by default, the password should be left blank).
   
5. Select DMZ from the menu on the left under the Firewall section.
6. Check the box below Enable.
7. Enter the IP Address of the Xbox.
8. Select Apply Changes at the bottom of the page.

Disable DMZ

1. Open a web browser.
2. In the address bar at the top, type in 192.168.2.1
3. Click Login in the upper right.
4. Input the password and click Login (by default, the password should be left blank).
   
5. Select DMZ from the menu on the left under the Firewall section.
6. Uncheck the box below Enable.
7. Select Apply Changes at the bottom of the page.

 

Belkin: DMZ

Belkin (Routers): DMZ
Login Information

• Gateway - 192.168.2.1
• Username - N/A (None)
• Password - N/A (None)

DMZ

1. Open a web browser.
2. In the address bar at the top, type in 192.168.2.1
3. Click Login in the upper right.
4. Input the password and click Login (by default, the password should be left blank).
   
5. Select DMZ from the menu on the left under the Firewall section.
6. Check the box below Enable.
7. Enter the IP Address of the Xbox.
8. Select Apply Changes at the bottom of the page.

Disable DMZ

1. Open a web browser.
2. In the address bar at the top, type in 192.168.2.1
3. Click Login in the upper right.
4. Input the password and click Login (by default, the password should be left blank).
   
5. Select DMZ from the menu on the left under the Firewall section.
6. Uncheck the box below Enable.
7. Select Apply Changes at the bottom of the page.