Belkin: Changing the Wireless Channel

Discus and support Belkin: Changing the Wireless Channel in XboX Networking Hardware to solve the problem; Belkin (Routers): Changing the Wireless Channel Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Changing the... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Aug 1, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Belkin: Changing the Wireless Channel


    Belkin (Routers): Changing the Wireless Channel
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)
    Changing the Wireless Channel

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Channel and SSID from the menu on the left under the Wireless section.
    7. From the dropdown menu labeled Wireless Channel select the desired channel. (Channels 1,3,9,11)
    8. Select Apply Changes at the bottom of the page.

    :)
     
    XB1R Hades, Aug 1, 2014
    #1
  2. XB1R Apollo
    XB1R Apollo Guest
    Belkin: Change Wireless Channel

    Belkin (Routers): Change Wireless Channel
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)

    Change Wireless Channel

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Channel and SSID from the menu on the left under the Wireless section.
    7. From the dropdown menu labeled Wireless Channel select the desired channel. (Channels 1,3,9,11)
    8. Select Apply Changes at the bottom of the page.
     
    XB1R Apollo, Aug 1, 2014
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    Belkin: Change the Wireless Channel

    Belkin (Routers): Change the Wireless Channel
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)

    Change the Wireless Channel

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Channel and SSID from the menu on the left under the Wireless section.
    7. From the dropdown menu labeled Wireless Channel select the desired channel. (Channels 1,3,9,11)
    8. Select Apply Changes at the bottom of the page.
     
    XB1R Apollo, Aug 1, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Belkin: Changing the Wireless Channel