Belkin: Change Wireless Band

Discus and support Belkin: Change Wireless Band in XboX Networking Hardware to solve the problem; Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Aug 1, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Belkin: Change Wireless Band


    Belkin (Routers): Change Wireless Band (Width)
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)
    Change Wireless Band (Width)

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Channel and SSID from the menu on the left under the Wireless section.
    7. From the dropdown menu labeled Wireless Bandwidth select "20 MHz Only".
    8. Select Apply change to save settings.

    :)
     
    XB1R Hydros, Aug 1, 2014
    #1
  2. XB1R Athena
    XB1R Athena Guest
    Belkin: Change Wireless Band

    Belkin (Routers): Change Wireless Band (Width)
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)

    Change Wireless Band (Width)

    This device only operates on 20MHz band. It is not necessary to change this setting.
     
    XB1R Athena, Aug 1, 2014
    #2
  3. XB1R Hydros
    XB1R Hydros Guest
    Belkin: Change Wireless Band

    Belkin (Routers): Change Wireless Band (Width)
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)
    Change Wireless Band (Width)

    This device does not have this feature.
     
    XB1R Hydros, Aug 1, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Belkin: Change Wireless Band