At a loss with my Series S' connection based issues.

Hi MJBou, my name is Rodrigo. I'm an Independent Advisor and a member of the Microsoft community and I'd love to assist you today.

I am sorry to hear that.

You can use your device IP on the DMZ of your Router.

There are great guides online*:

https://www.windowscentral.com/xbox-one-dmz-guide

https://www.ubisoft.com/help/connec...article/setting-up-dmz-for-xbox-one/000061024

There is also this complete guide about NAT errors and configuration on the Xbox website, I recommend it:

https://support.xbox.com/help/hardware-network/connect-network/xbox-one-nat-error

----------------------------------------
Setting the DMZ
----------------------------------------

----------------------------------------
A) On your Router
----------------------------------------
1. Make sure to use the ethernet cable connection, it is more reliable than the Wi-Fi one. (If possible)

2. You then, have to assign a static (fixed) IP for your Xbox console on your router, which will enable you to do the next steps

3. Turn on DMZ under the IP you selected for your Xbox Console.

4. Turn on UPnP on your router

By doing that, you'll pretty much have an open and direct connection to the game servers.

----------------------------------------
B) On the Xbox Console
----------------------------------------

Configure the network settings accordingly.

Enter the Settings menu.

Under the General tab, select Network Settings then Advanced Settings.

Take note of the information displayed

Select IP Settings > Manual.

Enter the same IP you configured on your router DMZ.

*Note: This is a non-Microsoft website.

The page appears to be providing accurate, safe information.

Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products).

Thoroughly research any product advertised on the site before you decide to download and install it.

Hi,

This is the same monitor as I have. I mainly use it for my PC, but I've also connected my Series S to it too. Unfortunately, you won't be able to select 1440P and 120Hz on the LG 27GN850 as it tops out at 100Hz on HDMI at 1440P.

The work around is to change the resolution to 1080P and then select 120Hz. Games on the Series X will still render at 4K but be super-sampled down to 1080P. Yes, it's not as good as the native resolution, but the loss in picture quality shouldn't be that
noticeable. I'm pretty impressed how my Series S looks on it.

still having sound loss even after reinstalling doing a reset checking my base in connected but it does not solve the problem

you cannot use disc based games on the series s, you need the disc in the drive to authenticate and prove you own the game. as the series s is all digital you would need the series x to play disc based games.

Ok so what base can I use for the game to work on my series s