Asus: Wireless Security

Asus (Modems/Gateways): Wireless Security
Login Information

• Gateway: 192.168.1.1
• Username: admin
• Password: admin

How To Find Wireless Passphrase (WPA/WEP)

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address “192.168.1.1” into the web address bar.
   
4. When prompted for a username and password type in “admin” for both the username and the password.
   
5. On the main page select the “System status” icon (shown as a router with a lock on it).
   
6. On the right hand side is the current wireless password (by default there is no current password, wireless security is off).
   

Changing Wireless Security Type/ Disabling Wireless Security

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address “192.168.1.1” into the web address bar.
   
4. When prompted for a username and password type in “admin” for both the username and the password.
   
5. On the main page select the “System status” icon (shown as a gateway with a lock on it).
   
6. On the right had side of the page you will see some basic wireless information.
   
7. Make sure the 2.4Ghz tab is selected.
8. In the “Authentication Method” drop down box, select the “WPA2-Personal” option.
   
9. Next add a wireless password in the “WPA-PSK key” box below.
10. Click on the “Apply” button.
11. To disable the wireless security, change the “Authentication Method” dropdown back to “Open System” and set the “WEP Encryption” to “None”.
    
12. Click the “Apply” button on the bottom of the page.

:)

 

Asus: Wireless Security

Asus (Routers): Wireless Security
Login Information

• Gateway -
  192.168.123.1
• Username - admin
• Password - admin

How To Find Wireless Passphrase (WPA/WEP)

The Wireless Password is not visible on the default firmware for this device.



Changing Wireless Security Type/ Disabling Wireless Security

1. Plug the computer into a LAN port via an ethernet cable.
   
2. Open a web browser and in the address bar enter
   192.168.123.1 and enter admin for both the username and password when prompted.
   
3. Select Wireless from the menu on the left.
   
4. Select Interface from the submenu.
   
5. To change/disable the wireless security from the Authentication Method drop down select the desired security type (Open System, WPA-Personal, WPA2-Personal or WPA-Auto-Personal).
   
6. If Open System is selected, choose the WEP Encryption (None, 64-bit or 128-bit).
   
7. If WPA is selected, choose the WPA Encryption (TKIP, AES, TKIP+AES).
   
8. Enter the WPA Pre-Shared Key or WEP Key.
   
9. If WEP security is selected the password will need to be 10 charecters in length (if 64-bit) or 26 characters in length (if 128-bit) and can only use 0-9 and A-F.
   
10. If WPA or WPA2 was selected the password can be between 8-63 characters, is case sensative and can use any character on your keyboard.
    
11. Once the passphrase has been entered click Finish.
    

 

Asus: Wireless Security

Asus (Routers): Wireless Security
Login Information

• Gateway: 192.168.1.1
• Username: admin
• Password: admin

How To Find Wireless Passphrase (WPA/WEP)

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address “192.168.1.1” into the web address bar.
4. When prompted for a username and password type in “admin” for both the username and the password.
   
5. On the main page select the “System status” icon (shown as a gateway with a lock on it).
   
6. On the right hand side is the current wireless password (by default there is no current password, wireless security is off).
   

Changing Wireless Security Type/ Disabling Wireless Security

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address “192.168.1.1” into the web address bar.
4. When prompted for a username and password type in “admin” for both the username and the password.
   
5. On the main page select the “System status” icon (shown as a gateway with a lock on it).
   
6. On the right hand side you can change the “Authentication Method” in the dropdown.
   
7. After selecting the desired authentication add a wireless password in the box below.
   
8. Click on the “Apply” button.
9. To disable the wireless security change the “Authentication Method” dropdown back to “Open System”.
   
10. Click the “Apply” button on the bottom of the page.