Asus: Restoring Factory Defaults

Asus (Modems/Gateways): Restoring Factory Defaults
Login Information

• Gateway: 192.168.1.1
• Username: admin
• Password: admin

Restore Factory Defaults



From Hardware:

1. Locate the back of the gateway, where the Ethernet ports are located.
   
2. Hold the reset button on the back for 30 seconds. You will need a paperclip, toothpick or pen to hold down the reset button.
   
3. Let go of the reset button and wait about 1 min for the device to reboot.
   

From Firmware:

1. Connect a computer to the gateway using an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address “192.168.1.1” into the web address bar.
   
4. When prompted for a username and password type in “admin” for both the username and the password.
   
5. On the left hand side of the web page select the “Advanced Settings” option.
   
6. Click on “Administration” subcategory.
7. Click on the “Restore/Save/Upload settings” tab at the top.
8. Click on the “Restore” button.
9. Wait for the router to reboot. This may take up to 1 min.

:)

 

Asus: Restore Factory Defaults

Asus (Routers): Restore Factory Defaults
Login Information

• Gateway: 192.168.1.1
• Username: admin
• Password: admin

Restore Factory Defaults





From Hardware:

1. Locate the back of the gateway, where the Ethernet ports are located.
2. Hold the reset button on the back for 30 seconds. You will need a paperclip, toothpick or pen to hold down the reset button.
   
3. Let go of the reset button and wait about 1 min for the device to reboot.

From Firmware:

1. Connect a computer to the gateway using an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address “192.168.1.1” into the web address bar.
4. When prompted for a username and password type in “admin” for both the username and the password.
   
5. On the left hand side of the web page select the “Advanced Settings” option.
6. Click on “Administration” subcategory.
7. Click on the “Restore/Save/Upload settings” tab at the top.
8. Click on the “Restore” button.
9. Wait for the router to reboot. This may take up to 1 min.

 

Asus: Restore Factory Defaults

Asus (Routers): Restore Factory Defaults
Login Information

• Gateway:
  192.168.1.1
• Username: admin
• Password: admin

Restore Factory Defaults



From Hardware:

1. Locate the back of the router, where the Ethernet ports are located.
2. Hold the reset button on the back for 30 seconds. You will need a paperclip, toothpick or pen to hold down the reset button.
   
3. Let go of the reset button and wait about 1 min for the device to reboot.

From Firmware:

1. Connect a computer to the router using an Ethernet cable.
2. Open a web browser on a computer.
3. Type the address “192.168.1.1” into the web address bar.
   
4. When prompted for a username and password type in “admin” for both the username and the password.
   
5. On the left hand side of the web page under the “Advanced Settings”, click on the “Administration” option.
   
6. Click on the “Restore/Save/Upload settings” tab at the top.
7. Click on the “Restore” button.
8. Wait for the router to reboot. This may take up to 1 min.