Asus Asus DSL-N11: control elite

Discus and support Asus Asus DSL-N11: control elite in XboX Networking Hardware to solve the problem; Asus (Modems/Gateways) Asus DSL-N11: control elite Contacta con el servicio técnico de tu país y te van a dar las indicaciones y posibles lugares donde... Discussion in 'XboX Networking Hardware' started by sauron129, Oct 31, 2018.

  1. sauron129
    sauron129 Guest

    Asus Asus DSL-N11: control elite


    Asus (Modems/Gateways) Asus DSL-N11: control elite
    Contacta con el servicio técnico de tu país y te van a dar las indicaciones y posibles lugares donde se podría arreglar.

    -[Translation - Contact the technical service of your country and they will give you the indications and possible places where it could be arranged.]

    :)
     
    sauron129, Oct 31, 2018
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Asus Asus DSL-N11: UPnP

    Asus (Modems/Gateways) Asus DSL-N11: UPnP
    Login Information

    • 192.168.1.1
    • Username – admin
    • Password - admin




    UPnP



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. From this point forward there are no screen shots or reference material to go off of for this device. The following is based on documentation for the n13.
    6. Select LAN from the menu on the left.
    7. Toggle the UPnP check box depending on your scenario.
    8. Click the Save button at the bottom of the page.
     
    XBR Poseidon, Oct 31, 2018
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Asus Asus DSL-N11: Overview

    Asus (Modems/Gateways) Asus DSL-N11: Overview
    Asus DSL-N11





    Login Information

    • 192.168.1.1
    • Username – admin
    • Password - admin


    How to Find SSID (Network Name)



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. Select Wireless from the submenu.
    6. From this point forward there are no screen shots or reference material to go off of for this device.
    7. The Wireless Network Name (SSID) will be listed next to Wireless Network Name (SSID).






    How To Find Wireless Passphrase (WPA/WEP)



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. Select Wireless from the submenu. There may be a tab at the top of the screen that contains the wireless security settings.
    6. From this point forward there are no screen shots or reference material to go off of for this device.
    7. The Wireless Passphrase will be found in either key 1 or WPA passphrase depending on the wireless security type enabled on your network.


    Changing Wireless Security Type/ Disabling Wireless Security



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. Select Wireless from the submenu. There may be a tab at the top of the screen that contains the wireless security settings.
    6. From this point forward there are no screen shots or reference material to go off of for this device.
    7. Look for a security type drop down and select the desired security type.
    8. Click the Save button at the bottom of the screen.


    MAC Filtering



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. Select Wireless from the submenu. There may be a tab at the top of the screen that refers to MAC Filtering.
    6. From this point forward there are no screen shots or reference material to go off of for this device.
    7. Look for an option that says MAC filtering or device access control.
    8. Set this function to off or disabled.
    9. Click the save button.


    Change Wireless Channel



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. Select Wireless from the submenu.
    6. From this point forward there are no screen shots or reference material to go off of for this device.
    7. There should be a drop down menu labeled channel. From this drop down select the desired channel. (Channels 1,3,9,11)
    8. Click the Save button.


    Change Wireless Mode



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. Select Wireless from the submenu.
    6. From this point forward there are no screen shots or reference material to go off of for this device.
    7. The mode should either say “Mode”. It will have options that designate A,B,G,N or 802.11 followed by one of those letters. Choose G or 802.11G.
    8. Click Save.


    DHCP Reservation



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. From this point forward there are no screen shots or reference material to go off of for this device.
    6. Select LAN from the menu on the left.
    7. Select DHCP Server from the tabs at the top.
    8. Set Enable Manual Assignment to yes.
    9. Enter the devices mac address and IP address.
    10. Click the Add button.
    11. Click the Apply button.


    UPnP



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. From this point forward there are no screen shots or reference material to go off of for this device. The following is based on documentation for the n13.
    6. Select LAN from the menu on the left.
    7. Toggle the UPnP check box depending on your scenario.
    8. Click the Save button at the bottom of the page.


    DMZ



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. From this point forward there are no screen shots or reference material to go off of for this device. The following is based on documentation for the n13.
    6. Select WAN from the menu on the left.
    7. Select DMZ host from the tabs across the top.
    8. Enter the IP Address in the DMZ Host IP Address field.
    9. Click the Save button at the bottom of the page.


    Disable DMZ



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. From this point forward there are no screen shots or reference material to go off of for this device. The following is based on documentation for the n13.
    6. Select WAN from the menu on the left.
    7. Select DMZ host from the tabs across the top.
    8. Clear the DMZ field.
    9. Click the Save button at the bottom of the screen.


    Port Forwarding



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. From this point forward there are no screen shots or reference material to go off of for this device. The following is based on documentation for the n13.
    6. Select Firewall from the menu on the left.
    7. Select Virtual Server from the tabs across the top.
    8. Enter the console IP Address in the Lan Address column.
    9. Select TCP&UDP from the Protocol Type drop down.
    10. Enter 3074 in both LAN Port and Public Port.
    11. Check the enable box.
    12. Click the Add button.


    Disable Port Forwarding



    1. Open a web browser.
    2. Enter http://192.168.1.1 into the address bar. (Or click the link)
    3. Enter “admin” for both the username and password.
    4. Select Advanced Setting from the menu on the left.
    5. From this point forward there are no screen shots or reference material to go off of for this device. The following is based on documentation for the n13.
    6. Select Firewall from the menu on the left.
    7. Select Virtual Server from the tabs across the top.
    8. Click the Cancel button next to the entries referring to port 3074.
    9. Click the Apply button at the bottom of the screen.


    Firewall



    There are firewall settings but none of them appear to apply to the Xbox console.







    How to Find Firmware Version



    1. Open a web browser.
    2. Click
      here       to navigate to Asus’ web page and download the firmware you need.
    3. Enter http://192.168.1.1 into the address bar. (Or click the link)
    4. Enter “admin” for both the username and password.
    5. The current Firmware version is listed at the top of the screen next to Firmware version.


    Firmware Update



    1. Connect your computer to the router via ethernet cable.
    2. Open a web browser.
    3. Click
      here       to navigate to Asus’ web page and download the firmware you need.
    4. Enter http://192.168.1.1 into the address bar. (Or click the link)
    5. Enter “admin” for both the username and password.
    6. Select Advanced Setting from the menu on the left.
    7. From this point forward there are no screen shots or reference material to go off of for this device. The following is based on documentation for the n13.
    8. Select Administration from the submenu.
    9. Select Firmware Upgrade from the tabs across the top.
    10. Click the Browse button, select the file you downloaded earlier.
    11. Click the Upload button.


    Restore Factory Defaults



    Through Hardware

    1. Locate the reset hole on the rear panel of the device.
    2. Press the reset button for more than 5 seconds.
    3. Release the button.


    Through Firmware

    1. Connect your computer to the router via ethernet cable.
    2. Open a web browser.
    3. Click
      here       to navigate to Asus’ web page and download the firmware you need.
    4. Enter http://192.168.1.1 into the address bar. (Or click the link)
    5. Enter “admin” for both the username and password.
    6. Select Advanced Setting from the menu on the left.
    7. From this point forward there are no screen shots or reference material to go off of for this device. The following is based on documentation for the n13.
    8. Select Administration from the submenu.
    9. Select Restore/Save/Upload Setting.
    10. Click the Restore button.
    11. Click Ok on the following pop up.


    Bridging Guide



    Bridge mode is not available on this device.



    Multiple Console Support



    We have confirmed that this network device is unable to support more than one console with an Open NAT.



    Known Issues



    There are no known issues with this device.





    Device Manual

    Click
    here     to go to a manual for this device
     
    XBR Poseidon, Oct 31, 2018
    #3
  4. WPAK
    WPAK Guest

    Asus Asus DSL-N11: control elite

    Web translation:

    elite control

    The control was hit and the triggers were damaged and I would like to know where I can send it to rule in Colombia. ???

    Response:

    Hi there,

    please see this link on how to set up a repair request for a Elite controller:
    Servicing your Xbox Elite Controller
     
    WPAK, Oct 31, 2018
    #4
  5. Chyrola Cuello
    Chyrola Cuello Guest
    Contacta con el servicio técnico de tu país y te van a dar las indicaciones y posibles lugares donde se podría arreglar.

    -[Translation - Contact the technical service of your country and they will give you the indications and possible places where it could be arranged.]
     
    Chyrola Cuello, Nov 5, 2018
    #5
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Asus Asus DSL-N11: control elite