Arris: Change Wireless Mode

Discus and support Arris: Change Wireless Mode in XboX Networking Hardware to solve the problem; Arris (Modems/Gateways): Change Wireless Mode **** TG1672 (**** Firmware) Login Information Gateway - 192.168.0.1 Username - admin Password -... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Jun 27, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Arris: Change Wireless Mode


    Arris (Modems/Gateways): Change Wireless Mode
    **** TG1672 (**** Firmware)

    Login Information

    • Gateway - 192.168.0.1
    • Username - admin
    • Password - password
    Change Wireless Mode

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Enter the username and password if the gateway asks.(admin/password)
    4. From the menu on the top select Wireless.
    5. From the submenu on the top select Wireless Setup.
    6. From the menu on the left select Advanced.
    7. From the drop down menu labeled Wireless Mode select G Only.
    8. Click Apply.

    :)
     
    XB1R Hades, Jun 27, 2014
    #1
  2. XB1R Apollo
    XB1R Apollo Guest
    Arris: Change Wireless Mode

    Arris (Modems/Gateways): Change Wireless Mode
    Login Information

    • Gateway - 10.0.0.1
    • Username - admin
    • Password - password

    Change Wireless Mode

    *The Wireless Mode can not be changed on this device.*
     
    XB1R Apollo, Jun 27, 2014
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    Arris: Change Wireless Mode

    Arris (Modems/Gateways): Change Wireless Mode
    Login Information

    • Gateway - 10.0.0.1 or 192.168.0.1
    • Username - admin
    • Password - <blank> or Custom-set

    Change Wireless Mode

    1. Open a web browser.
    2. Enter http://192.168.0.1 or
      http://10.0.0.1 in the address bar. (Or click one of the links)
    3. Enter the username and password if the gateway asks. (admin/blank)
    4. From the menu on the top select Wireless.
    5. From the submenu on the top select Wireless Setup.
    6. From the menu on the left select Advanced.
    7. From the drop down menu labeled Wireless Mode select G Only.
    8. Select Apply.
     
    XB1R Apollo, Jun 27, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Arris: Change Wireless Mode