Ambit-Ubee: Restore Factory Defaults

Discus and support Ambit-Ubee: Restore Factory Defaults in XboX Networking Hardware to solve the problem; Ambit-Ubee (Modems/Gateways): Restore Factory Defaults Ubee DDW3600 Login Information: Default Gateway - 192.168.100.1 / 192.168.0.1 Username –... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, May 18, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Ambit-Ubee: Restore Factory Defaults


    Ambit-Ubee (Modems/Gateways): Restore Factory Defaults
    Ubee DDW3600

    Login Information:

    • Default Gateway - 192.168.100.1 / 192.168.0.1
    • Username – user / admin / root
    • Password – user / cableroot / root



    Restore Factory Defaults



    Through firmware



    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar.
    3. Click Login in the upper right corner, enter the login information provided on this page.
    4. Select Tools from the menu across the top.
    5. Select User Defaults from the menu on the left.
    6. Set both Restore Defaults and Reset The System to Yes.
    7. Click the Apply button at the bottom of the screen.


    Through Hardware



    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.

    :)
     
    XBR Poseidon, May 18, 2014
    #1
  2. XB1R Hades
    XB1R Hades Guest
    Ambit-Ubee: Restore Factory Defaults

    Ambit-Ubee (Modems/Gateways): Restore Factory Defaults
    Login Information

    • Default Gateway - 192.168.0.1
    • Username - user
    • Password - user

    Restore Factory Defaults

    Through firmware

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Tools from the menu at the top.
    6. Select Yes for both Restore Defaults and Reset The System.
    7. Select Apply.
    Through Hardware

    1. Locate the reset button on the back of the device (it is labeled "Reset").
    2. Hold the reset button for 30 seconds.
     
    XB1R Hades, May 18, 2014
    #2
  3. XB1R Athena
    XB1R Athena Guest
    Ambit-Ubee: Restore Factory Defaults

    Ambit-Ubee (Modems/Gateways): Restore Factory Defaults
    Login Information

    • Default Gateway - 192.168.0.1
    • Username - user
    • Password - user



    Restore Factory Defaults

    Through firmware

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Tools from the menu at the top.
    6. Select Yes for both Restore Defaults and Reset The System.
    7. Select Apply.
    Through Hardware

    1. Locate the reset button on the back of the device (it is labeled "Reset").
    2. Hold the reset button for 30 seconds.
     
    XB1R Athena, May 18, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Ambit-Ubee: Restore Factory Defaults