Ambit-Ubee: Firewall

Ambit-Ubee (Modems/Gateways): Firewall
Login Information

• Default Gateway - 192.168.0.1
• Username - user
• Password - user

Older Firmware

Firewall

1. Open a web browser.
2. Enter http://192.168.0.1 in the address bar.
   
3. Select login from the side menu.
4. Enter the username and password. (user/user)
5. From the menu across the top select Firewall.
6. Select Content Filter from the menu on the left.
7. Un-check IP-Flood detection and Firewall Protection.
8. Select Apply.

Newer Firmware

Firewall

1. Open a web browser.
2. Enter http://192.168.100.1 in the address bar.
   
3. When prompted enter user for the username and user for the password.
4. From the menu across the top select Firewall.
5. Select Basic from the menu on the left.
6. Set IPv4 Firewall Protection to Low
7. Check the Optimize for XBOX box.
8. Select Apply.

:)

 

Ambit-Ubee: Firewall

Ambit-Ubee (Modems/Gateways): Firewall
instructions are wrong, there is no "basic" menu

 

Ambit-Ubee: Firewall

Ambit-Ubee (Modems/Gateways): Firewall
Ubee DDW3600

Login Information:

• Default Gateway - 192.168.100.1 / 192.168.0.1
• Username – user / admin / root
• Password – user / cableroot / root

Firewall

1. Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar.
   
2. Click Login in the upper right corner, enter the login information provided on this page.
   
3. Select Firewall from the menu across the top.
4. Un-check both IP Flood Detection and Firewall Protection.
5. Click the Apply button found at the bottom of the screen.