Aluratek Aluratek CDW530AM: Bridging Guide

Aluratek (Routers) Aluratek CDW530AM: Bridging Guide
Login Information

• Gateway: 192.168.123.254
• Username:
• Password: admin
• Click "Login"

1. Within the menu select Basic settings.
2. Then select Wireless settings
3. Click the button near the bottom of the screen that reads "WDS settings"
   
4. In the next menu locate Wireless Bridging and select "Enable" button.
   
5. You will then have to enter the MAC address of each of the devices that you wish to Bridge (i.e. PC,tablet, console.) in the available fields.
   
6. Now select the encryption type you wish to use to secure the transmission. NOTE: using anything other than WEP may not be compatible.
   
7. Create an encryption key here based on the type chosen. NOTE: all associated devices must use the same encryption type and key to communicate.
   

NOTE: Using this type of bridging within this device is not recommended and may not connect to your console or other network enabled devices.

:)

 

Aluratek Aluratek CDW530AM: Known Issues

Aluratek (Routers) Aluratek CDW530AM: Known Issues
This is a 3G/4G device and thus may have issues with online multiplayer matchmaking and latency.

 

Aluratek Aluratek CDW530AM: wifi

Aluratek (Routers) Aluratek CDW530AM: wifi
The MAC is necessary for specific reasons on your Xbox one. Your Xbox needs it to be able to perform certain tasks for your router and your router is used by your Xbox 24 hrs. a day 7 days a week if your on the instant on setting. If you need more information
on what a MAC address is or does please consult your network provider.