Adaptive Controller power adapter.

Anton84 · Sep 29, 2018

I cannot find the power adapter for the adaptive controller on the UK website?

:)

chattoe · Sep 29, 2018

Connecting xbox one to 2 tv's in separate rooms

If I used a USB to cat extender could I use power line adapters.

So it would go wired controller into USB to cat adapter then cat cable into power line adapter,
Then downstairs another power line adapter with cat 5 coming from it plugged into USB to cat adapter with USB cable into the xbox

I hope you know what I mean

KN1GHTMARE · Sep 29, 2018

Controller update?

Yup, its just for the new adapter. You actually will not be able to get the controller update unless the controller is plugged in to the console and the adapter plugged into the controller.

XBF George L · Sep 29, 2018

I recommend contacting
Xbox Customer Support. Also this controller is a very recently released product so some regions may not be fully supported at this time.

Thanks for reaching out

XBF George L

I recommend contacting
Xbox Customer Support. Also this controller is a very recently released product so some regions may not be fully supported at this time.

Thanks for reaching out

GrowlingYapper

As the adapter ever been updated since you got it if not plug adapter in to controller

Power up console sign in

I got the adapter day it released I did this and it updated its self

MaximumExtreme

Try turning off the controller, then unplug the adapter. Wait about 15 sec then plug the adapter back in the controller and power the controller back on. You could also try doing a hard reset by holding the power button on the front of the console until
it turns off then unplug it from the outlet for 30 sec then plug it back in and power back on.

StAtIc255

I have pretty much the same problem with no idea of a fix. Got new adapter, plugged the adapter into my controller and Astro A50's, message pops up to update controller, plug in my USB cable and the controller just shuts off and I can not get the update
because controller must be on but it refuses to power on when both usb and adapter are plugged in

ChaiKootha

Thanks for the feedback.. A little more detail:

My wireless adapter is always attached to my PC. (I don't have an XboxOne). It's after a power cycle where the sync is completely lost. I have to unplug and reinsert the adapter for it to work, so it seems as if the PC "forgot" the adapter was even attached
after a power cycle.

So, considering I always have the adapter attached to my PC, and that I only use my controller on my PC, the normal behavior should be:

1) I turn on my PC and it gets to the Windows 10 desktop

2) Turn on the controller

3) The controller should automatically sync with the adapter.

But unfortunately that doesn't happen...

Adaptive Controller power adapter.