Actiontec ActionTec Q1000: want young office

www.pcwintech.com/screenshots-actiontec-gt724wg-actiontec-firmware

What Country/State/Province do you live in? Utah, USA

Modem brand & model number: Actiontec Q1000

Router brand & model number: Actiontec Q1000 (Modem acts as both a router and modem)

Network Connection Type: Wired

Things you have tried: Port-Forwarding, most general troubleshooting

Is UPnP Enabled? Yes

Is NAT Type Open? Yes

Any Error Codes you encounter: None

What type of internet do you have? Broadband

Who is your ISP(Internet Service Provider)? Qwest

After you run "Test Xbox LIVE connection" and click on "More info", what is the exact message shown on screen?

W: 0000-000B

X: 0001-8005

Y: 20A8-4800

Z: 0000-0000

ID: FFFF-FFFF

The Linksys is connected to the Actiontec, yes. And I believe the Actiontec's routing function is disabled, since I use the Linksys to change the network settings

Hey there Jrocker23! Xbox360italy's link is definitely helpful for connection issues! If you continue to have trouble though you may want to forward your ports (http://support.xbox.com/xbox-live/connecting/network-ports-used-xbox-live) according to the Actiontec
site:



Will my Xbox work with the Actiontec Modem or Router?

Yes, Actiontec Modems and Routers are compatible with the Xbox. However, it may be necessary to forward the ports used by the Xbox, in the Actiontec Modem or Router. Without Port Forwarding, the Xbox Connection Test may report a "NAT" rating of "STRICT"
or "MODERATE", rather than "OPEN".

Yes, use the info from your ISP. It (at least the username) may have been displayed in the actiontec before you switched the option. Basically, you need to configure your router to match what the actiontec was set to before you switched it to bridge mode
(was the actiontec set to PPPoE?).