2Wire: Xbox 360 banned

Sorry for the late reply!

[quote user="Cartoonite"]I finally got a working network cable running up through the walls into the room and connected the 360 directly to the 2wire modem.[/quote]Did you actually have your Xbox 360 directly connected to the 2wire gateway, or did you have
any networking device connected in between this path?

It would be great if you are able to find out the model number of your 2wire gateway.

Could you try, once more, to directly connect your Xbox 360 with an Eternet Cable to the 2wire gateway, but this time, make sure you disconnect your second Xbox 360, along with the Xbox One, from your network.

Disable UPnP and reboot your 2wire gateway.

Enable UPnP and reboot your 2wire gateway.

This procedure will refresh the map table.

If it's possible, are you able to try and connect your console on a different network (friends house), to verify if this is exclusively tied to your network, or not.

Keep us posted!

I think I may have confused you with my suggestion, by connecting the failing Xbox directly to the router. In this equation, I'm not referring to your Linksys E1200, but instead the 2wire gateway.

You mentioned that you already have one of your Xbox 360's connected directly to the router/modem (2wire). I would like you to try with the exact same setup as your working Xbox 360, but with the failing 360 machine connected directly to your 2wire gateway,
without the Linksys E1200 in transit, or any other networking device for that matter. With the exception for the failing Xbox 360 and your 2wire gateway.

Topology:

2wire (gateway) ------ Ethernet -------
Xbox 360 (the failing console).

Before you go ahead, go to Xbox System Settings and select
Network settings. Select connection type and Configure Network. On the
Additional settings tab select Restore network settings to factory settings.

Turn off your Xbox.

Turn off your 2wire gateway and let it sit for a couple of minutes.

Turn on the 2wire and wait one minute for it to connect properly and wire your failing Xbox 360 the exact same way as your working Xbox 360.

Now on your console, head back to Network Settings and select
Test Xbox Live Connection.

Post back and let us know how that goes and we'll go from there.

Thanks!

Enforcement does not work that way, chats are verified before enforcement can be done.

The Enforcement teams don't use the forums at all and they only communicate through a Case Review.

24 Hour communications suspensions and Console Suspensions are not review-able, however you can find more information in these cases through the communication sent by the teams to the email address associated with your Xbox Live Gamertag.

Remember that all suspensions are only enforced when a breach of the Code of Conduct or Terms of Service has happened.

For further information on how Enforcement is done click HERE.

If you believe the suspension was in error and if you're eligible, you can submit a case review using the steps HERE, however sometimes you're asked to
complete a short questionnaire before you can submit a case review. All of the questions refer to the Code of Conduct, which you should review prior to filing
the review.

If you fail on the questionnaire during the Case Review, don't worry as you'll be given another chance in 24 hours.

If you found this post helpful please up-vote

Sorry to hear this. But be aware that the code of conduct says you are responsible for everything that happens with your account even if you was not the one doing it. This is the problem with the game share as your account has to setup on someone else
console so they can use it.

Every report gets investigated by XBLPET before an enforcement act is decided. If you think someone has broken the Code of Conduct just report that person from your account