Change the "IPv6" setting from "Automatic" to "Manual." not available

IPV6 is simply adding addresses to the internet

If you have an internet connection, you have an IP address, which is assigned from your ISP from their pool of free ones.

It will not help any of your issues, and is not a manual function.

Hello Mario J! I'm Kris and I'd be happy to help you with your question.

If this is on one of the consoles, it should be automatic. If its not automatically switching to IPV6 then you can change the IPV6 from auto to manual and put in the and put in the address/subnet/default gateway.

Please note you will need to make sure IPv6 is enabled on your router and supported by your ISP as not all of them support IPv6 or set it up automatically.

Can you give me this for the Apple Version.

-I believe I have to go through the Airport Utility

-Select my device > Internet Tab > Internet Options

I have options for Configure IPv6 (Link-Local, Automatic, Manual) - set to automatic

IPv6 Mode (Native, Tunnel) - set to native

checkbox for Enable IPv6 Connection Sharing - Box is checked

Do any of these need to change??

Hi OMEGASYPHER my name is Rodrigo. I'm an Independent Advisor and a member of the Microsoft community and I'd love to assist you today.

I am sorry to hear that.

The console should have connected automatically to IPv6 if it's correctly set on your router and Internet Provider.

Please, take a look here: https://support.xbox.com/help/hardware-network/connect-network/ipv6-on-xbox-one

Have you tried to enable it manually on your settings?

To set it up, follow these steps:

Go to Settings > Select Network > Select Advanced settings > Select IP settings > Change the "IPv6" setting from "Automatic" to "Manual."

Enter your IPv6 address, subnet prefix length, and default gateway information provided by your Internet Service Provider (ISP).

Save your changes.

If it still does not work, please, contact your Internet Provider, they should be able to offer further insight on this issue.

I hope this helps.

Hi M B.

My name is Mauro and I am happy to help you.

For your Xbox console to connect to the Internet using IPv6, your home router must have IPv6 enabled and your Internet Service Provider (ISP) must support IPv6. If your ISP has already unblocked it, you need to check your router settings and make changes needed so it can switch to IPV6 To change it from the console:

1. On the Xbox Series X console, go to Settings.
2. Select Network.
3. Select Advanced Settings.
4. Select IP Settings. Change the "IPv6" setting from "Automatic" to "Manual". Enter the IPv6 address, subnet prefix length, and default gateway information provided by your Internet Service Provider (ISP).
5. Save your changes.

Sources:

https://answers.microsoft.com/en-us...pv6-on-xbox-series-x/cc47da81-9a90-442d-90d7- 1cdb66802a45

https://support.xbox.com/help/hardware-network/connect-network/network-settings

Thanks Mauro