Xbox Series X Controller connects and works well, but keeps blinking

Hi ЧирковНикита,

Thank you for posting in Microsoft Xbox Community. I understand that you're having issues with your controller whenever you use it on your Windows 10 PC.

A blinking Xbox controller usually indicates a problem with the connection between the controller and the PC, often due to syncing issues or low batteries.

To isolate your issue, please try to use a different USB cable that supports data transfer and fast charging.

If you're still experiencing issues, try to use a different battery.

Regards,

Alvaro

Thanks for the reply. Interesting, I did not know that it was "wirelessly" connected while connected to a USB C Data Cord. As soon as I unplug, it stays disconnected (in sync mode the controller also keeps blinking then turns off). If this is right I don't know why I also can't sync any of my other Xbox controllers to the series X unless connected with a cord (works on an One X controller also, stops when unplugged). I don't know why the sync button (blinking) stopped operating all together.

I replaced my batteries and tried to pull and place back in earlier with no luck. I also updated the controller as I set up as new.

The interesting thing is I am able to use the series X controller perfectly on PC wirelessly with windows 10/Xbox PC adapter. I have no problems on PC wireless.

My controller stop working too series x , factory controller . Last night working and today my samsung tv remote control my xbox and the xbox controller no longuer view by the xbox , i use another controller from my other xbox seris s , and this controller work but not the one work last night , i try the little button to match xbox with but nothing , the controller do no longuer view on my xbox series x , can control de series s but can't be view or connect to the series x anymore

If your Xbox Series X controller blinks twice, it usually means that the batteries are low or the connection with the console has been lost. Here's what you can try:

1. Replace the batteries: If the batteries are low, the controller will blink twice repeatedly. Try replacing the batteries with fresh ones and see if it solves the problem.

2. Re-sync the controller: To re-sync the controller with the console, press and hold the pairing button on the console until the light starts flashing. Then, press and hold the pairing button on the controller until the light on the controller begins to blink rapidly. Wait a few seconds for the controller to connect.

3. Check for interference: Certain wireless devices or objects may interfere with the controller's signal. Make sure there aren't any devices or obstacles blocking the signal between the controller and the console.

If none of the above solutions work, you may need to contact Xbox support for further assistance.

Hi,

The Series S and X controllers work on same devices the earlier controller can connect to. This includes:

Xbox One Game receiver for Windows 10

Bluetooth (PC, Android, iOS)

Xbox One, One S, X and Series X/S.