Controller L analog intermittently failing to register movements on the X axis. Brand new...

Very helpful, thanks. I should have checked my settings properly. But the french confused me.

The important parts are the following (you only need to set the axe settings to fly):

Flight control surfaces > Primary control surfaces

- Ailerons Axis: Joystick L-Axis X (Querruderachse)

- Elevator Axis: Joystick L-Axis Y (Höhenruderachse)

- Rudder Axis: Joystick L-Axis Z (Seitenruderachse)

Power Managent > Throttle (Energieverwaltung > Gashebel)

- Throttle Axis: Joystick thrust control X (Gashebelachse)

Also set the buttons of the Joystick where you prefer it.

Hi Longarm,

I had to remap the control keys, and now rudder pedals are ok.

Steps:

Create a new profile for rudder pedals on Controls menù on Pro Flight CESSNA Rudder Pedals section.

Brakes

Left/right brake - Joystick L-Axis X /Joystick L-Axis Y

Flight Control Surfaces - Primary Control Surfaces

Rudder Axis - Left/Right - Joystick R-Axis Z

Now I missed switch panel / Radio Panel / Instrument panel, but I'm working on that.

Thanks anyway.

Apologies but you are not understanding me.

The scenario goes like this:

Purchased xbox series controller;

Connected and updated series controller on laptop;

Attempted to play a game on laptop;

Controller input is not present;

In some games the controller doesn't appear in the setup;

In some games the controller registers but the inputs are incorrect, sometimes the z-axis registers as a button (x button) and not a movement;

Connected controller to tablet and mobile phone and controller input is fine;

Is the problem my games or my controller firmware not syncing with the games?

Is there a fix?

Makes sense. I think your PDP controller is a Hall Effect controller instead on potentiometer controllers. Potentiometer controllers have a conductive material applied to detect movement on the x and y axis. When the material starts to wear off you get drift.

I have updated the controller and that did not fix the issue. I reset the console keeping the apps/data and that did not fix the issue. I reset the console to factory settings and that did not fix the issue. I have unplugged the console from the power cord for hours and that did not fix the issue.

I went and bought a brand new Xbox x controller and the issue was still there.

When I tested both controllers on the accessories app, the right joystick movements and clicks is registered and When I turn magnifying on the right joystick works and is registering movements.

I only had my system since July and it’s already malfunctioning.