Hello, i'm trying to Connect my Xbox series s to an HP le2002x monitor

Xbox does not support Ultra Wide resolutions. Only 16:9 VESAstandard ones like you find on a normal television

I think I didn't add enough info to my main comment. My xbox one in fulling connected to my monitor. I'm just trying to set up my cable box to it. My xbox knows how to turn on and off my cable box, but the Xbox can not recognize my monitor through the whole
"Is it muted now" process. Since I'm using a HP monitor I selected HP TV and it didn't work. I'm trying to see what else I can do to try to connect my cable box to my monitor through my xbox one

Hi, Andy my name is Oskayra, and will be a pleasure help you

The issue you're encountering is likely due to a compatibility issue between the native resolution of your Xbox Series S and the maximum resolution supported by your HP w2408h monitor.

The Xbox Series S outputs a native resolution of 1920x1080, which is slightly different from the maximum resolution of 1920x1200 supported by your monitor. This mismatch is causing your monitor to display an "input signal out of range" message.

To resolve this issue, you'll need to adjust the output resolution of your Xbox Series S to match the native resolution of your monitor, which is 1920x1080. Here's how to do it:

On your Xbox Series S, navigate to Settings > General > TV & Audio > Video modes.

Under "Resolution," select "1920x1080" from the available options.

Once you've selected the desired resolution, restart your Xbox Series S.

After restarting, your Xbox Series S should output a resolution that is compatible with your HP w2408h monitor, and the "input signal out of range" message should no longer appear.

If you're still having trouble, you can try the following additional steps:

Ensure that your HDMI cable is properly connected to both your Xbox Series S and your monitor.

Try using a different HDMI cable if the one you're using is old or damaged.

Check for any firmware updates for your monitor.

I really hope your problem has been fixed with my help,if this works let me know and have a nice day. Oskayra

Monitors are meant for use with computers, not game systems

This monitor does not support resolutions Xbox supports according to page 51 of the manual, only computer resolutions.

Buy a TV, they adhere to the VESA standards Xbox supports

https://support.xbox.com/en-US/help/hardware-network/display-sound/tv-resolutions

Yes I'm there and the Game is for 2k. So that is not the problem.

My Xbox One X will not accepted the Setting "1440p with 120hz" with my HP X27i Monitor. Do you now that issue ?

With a lot of monitors, the lower the resolution, the higher the refresh rate you can have.

Near as I can tell, that monitor has a native refresh rate at 1440p of 60Hz (that is what it defaults to)...it then uses Variable refresh rate to bump it up higher. As noted above, the EDID fails as the Xbox needs a 120Hz setting to run at 120Hz. The monitor will definitely do 120Hz via HDMI but only on a PC/Laptop it seems.

I can't confirm it but I suspect that the monitor's native RR for 1080p is 120Hz.

This has been an issue for quite a few HP models, both whilst using the One X and also whilst using the newer Series X/S's