When I plug in My Xbox 1 X, it buzzes, and when i turn it on it turns off afyer 5 seconds...

Hi there. My name is Ron, I'm an independent advisor. I will be more than happy to help you.

Please try the following steps one at a time to resolve the issue:

Confirm that both your TV and Xbox One console are turned on.

Check that your TV is set to the correct input signal (HDMI).

Check that the HDMI cable connections to your console and to your TV are secure.

Check that the HDMI cable is connected to the "out to TV" port on the console.

Try plugging the HDMI cable into a different HDMI port on your TV.

Try using a different HDMI cable to connect your console to your TV.

Try connecting your console to a different TV.

Power cycle your Xbox One: Press and hold the Xbox button  for 10 seconds to turn off the console, and then turn it on again.

If the steps above don't sort out the issue, please try doing the steps below in sequence to do a display reset and see if it sorts it out.

If there's a disc in the console, eject it.

On the console, press and hold the Power button on the front of the console for 10 seconds to turn off the console.

Press and hold the Power button and the Eject button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. Don’t let go until you hear the second beep or see the console start up in low resolution mode (the Xbox startup screen will appear slightly pixelated).

Note If you have an Xbox Series S or Xbox One S All-Digital Edition, press and hold the Xbox button  and the Pair button  instead, as your console doesn’t have an Eject button.

In either case, this will start up your console in low-resolution mode (640 × 480).

You can also check the details from this link as a reference, https://support.xbox.com/en-US/help/hardware-ne....

When I connect the controller via USB should it be powered off or should it turn on automatically as I plug it? Because the last one's happening and when I do the "hold down the controller's Xbox and menu buttons for
5-10 seconds" it doesn't do anything.

As I plug the USB the controller turns on already blinking.

Im having the same problem except when i plug mine in it stays red for 5 seconds and then turns off then it turns back on and it keeps blinking red. what is happening any suggestions?

I just pressed the button to eject the disk when the xbox turned off and then when i turned it on it didnt make the buzz sound hopefully that fixes it

so when i turn it off the fan can be heard untill its cooled down then the buzzing noise can be heard if i unplug the power lead it stops but if i plug it back in it returns even if i dont turn the console on